This is the ultimate tool for carving thin straight slots in foam or other soft materials.
The slotter features a lightweight yet and flat and very strong alloy square with carbide sanding compound on the thin side.
The carbide surface is almost indestructible as long as you don't try to sand steel, alloy, glass or stone with it!
It can be dry cleaned with a bronze brush when getting dirty.
The slotters are available in 3 mm and 6 mm width by a length of 150 mm and height of 10 mm. Coarse or fine grit.
Use to cut 3mm/ 6 mm wide slots. Can also be used as a safe edge.